|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
AZ692/AZ693 10 AMP MINIATURE POWER RELAY FEATURES Isolation spacing greater than 8mm Dielectric strength 4000 Vrms coil to contact Approvals/Standards include UL, CSA,VDE, IEC, CEE, SEMKO Single pole - Forms A, B and C available 10A switching Life expectancy to 30 million operations Epoxy sealed version for automatic wave soldering and cleaning UL file E44211 ; CSA file LR85091 ; VDE 4120-4940-4002/A1 CONTACTS Arrangement SPDT (1 Form C) SPST (1 Form A and 1 Form B) Resistive load: Max switching power : 300W or 2500VA Max switched current : 10A ; 64A for 2ms Max switched voltage : 150* VDC or 380VAC 10A at 24VDC or 115VAC 0.25HP 120VAC motor load 10A at 250VAC B300 pilot duty * If switching voltage is greater than 30VDC, special precautions must be taken. Please consult the factory. GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 30 million operations 1x105 at 10A, 30VDC or 115VAC 2x105 at 8A, 250VAC 6ms at nominal coil voltage 2ms at nominal coil voltage (with no coil suppression) 4000 Vrms coil to contact 1000 Vrms between open contacts 10,000 megohms min at 500VDC, 20C, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage Standard -55C to 70C Sensitive -55C to 80C Both -55C to 110C 0.062" DA at 10 - 55 Hz 20g PBT Polyester Tinned copper alloy, PC 17 grammes Ratings Operate Time (typical) Release Time (typical) UL Rating Dielectric Strength (at sea level for 1 min) Insulation Resistance Material Resistance Silver cadmium oxide <30 milliohms initially (at rated current, voltage drop method) Dropout Ambient Temperature Operating Storage COIL Power At Pickup Voltage (typical) Max Continuous Dissipation Temperature Rise Standard coil 337mW Sensitive coil 234mW 1.9W at 20C ambient 1.4W at 40C ambient Standard 40C at nominal coil voltage Sensitive 26C at nominal coil voltage 110C Vibration Shock Enclosure Terminals Weight Max Temperature NOTES 1. All values at 20C 2. Relay may pull in with less than `Must Operate' value 3. PCB layout viewed towards terminals 4. Specifications subject to change without notice 5. Unsealed relays should not be dip cleaned Logistic Design (UK) Limited Unit 3 Eagle Centre Way, Sedgwick Road Luton LU4 9US, United Kingdom Tel +44 (0)1582 599 600 Fax +44 (0)1582 599 700 www.zettlerrelay.com sales@zettlerrelay.com LDZR201000 |
Price & Availability of AZ693 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |